Jrk G2 18v27 USB Motor Controller with Feedback

Pololu item #: 3148
Brand: Pololu supply outlook
Status: Rationed (Active and Preferred) 
RoHS 3 compliant

Price break Unit price (US$)
1 149.95
5 137.95


backorders allowed

This powerful motor controller makes closed-loop speed or position (but not both!) control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), and hobby radio control (RC). This version offers a wide 6.5 V to 30 V operating range and can deliver continuous output currents up to 27 A without a heat sink. Male headers and terminal blocks are included but not soldered, allowing for custom installations.

Alternatives available with variations in these parameter(s): version Select variant…

 Description Specs (13) Pictures (14) Resources (16) FAQs (1) On the blog (1) 

Jrk G2 18v27 USB Motor Controller with Feedback.

Jrk G2 18v27 USB Motor Controller with Feedback (top view).

Jrk G2 18v27 USB Motor Controller with Feedback, bottom view with dimensions.

Jrk G2 18v27 USB Motor Controller with Feedback with included hardware.

Jrk G2 18v27 or 24v21 USB Motor Controller with included terminal blocks and headers soldered.

Jrk G2 18v27 or 24v21 USB Motor Controller with included terminal blocks and headers soldered.

Jrk G2 18v27 or 24v21 USB Motor Controller with thick wires and included headers soldered.

Jrk G2 18v27 or 24v21 USB Motor Controller with thick wires and included headers soldered.

Basic pinout diagram of the Jrk G2 18v27 USB Motor Controller with Feedback.

Pololu Jrk G2 18v19 USB Motor Controller with Feedback controlling an industrial-duty linear actuator with an RC receiver.

Pololu Jrk G2 18v27 USB Motor Controller with Feedback controlling a high-power motor from USB.

Side-by-side comparison of the different Jrk G2 USB Motor Controllers with Feedback.

The graph window in the Jrk G2 Configuration Utility (version 1.2.0).

The main window and the variables window in the Jrk G2 Configuration Utility (version 1.2.0).


Related Products

Thin (2mm) USB Cable A to Micro-B, 6 ft, Low/Full-Speed Only
USB Cable A to Micro-B, 6 ft
Jrk G2 21v3 USB Motor Controller with Feedback
Jrk G2 21v3 USB Motor Controller with Feedback (Connectors Soldered)
Jrk G2 18v19 USB Motor Controller with Feedback
Jrk G2 24v13 USB Motor Controller with Feedback
Jrk G2 24v21 USB Motor Controller with Feedback
Jrk 21v3 USB Motor Controller with Feedback
RoboClaw Solo 60A Motor Controller
RoboClaw 2x60A Motor Controller (V8)
Pololu Simple High-Power Motor Controller 18v15 (Fully Assembled)
Pololu G2 High-Power Motor Driver 18v25
Pololu Dual G2 High-Power Motor Driver 24v14 Shield for Arduino
Pololu Dual G2 High-Power Motor Driver 18v18 for Raspberry Pi (Partial Kit)
Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
Micro Maestro 6-Channel USB Servo Controller (Assembled)
Tamiya Plug with 10cm Leads, Female
Tamiya Plug with 10cm Leads, Male
T Connector Male-Female Pair
XT60 Connector Male-Female Pair, Black
XT60 Connector Male-Female Pair, Yellow
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black

Related Categories

Pololu Jrk Motor Controllers with Feedback
Pololu Jrk G2 Motor Controllers with Feedback
Pololu Metal Gearmotors
Glideforce Light-Duty (LD) Linear Actuators
Glideforce Medium-Duty (MD) Linear Actuators
Glideforce Industrial-Duty (ID) Linear Actuators
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Pololu Simple Motor Controllers
RoboClaw Motor Controllers
Pololu High-Power Motor Drivers
Tic Stepper Motor Controllers
Maestro USB Servo Controllers
Development Boards (Programmable Controllers)
RC Interface
Nuts and Screws
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors